|
Lift-Type & Pull-Type Rotary Mowers The wide 8' cutting swath of the Alamo Industrial® A 96B Lift- and Pull-Type mowers will save you time, and by only requiring a 50 horsepower tractor with a 540 or 1000 PTO you’ll save on your fuel costs as well. These powerful twin-blade mowers will typically cut 3-1/2-acres per hour at 4-miles per hour. The timed, updraft blades are mounted on pan blade carriers as standard equipment. The smooth, unobstructed underside of the mower will allow the weed and grass clippings to be distributed evenly across the mower discharge area. The floating top link on the Lift-Type mower will reduce wheel loading in rough terrain and the optional offset hitch will allow the operator to cut close to obstructions. The blades are powered through the heavy-duty Cat 4 drivelines with slip clutch and safety shields. The mower deck is constructed of heavy 10-gauge steel with 1/4" x 9" high side skirts. The heavy-duty, floating, three-point hitch allows for quick mount and dismount of the mower. Both the Lift- and Pull-Type mowers may be attached to tractors with a 540 or 1000 RPM PTO. Dual tailwheels provide even weight distribution and level support of the unit when mowing. The cutting height may be adjusted from 1" to 12". The mowers come with debris deflectors as standard equipment. The chain guard, as pictured, is optional.
SPECIFICATIONS:
MOUNTING:
The A 96B Lift-Type mower may be mounted to tractors with a CAT II three-point hitch. The Pull-Type mower is mounted using a swivel clevis. Both may be attached to tractors with a 540 or 1000 RPM PTO.CUTTING HEAD:
The twin, updraft, blades are made of 1/2" x 3-1/2" x 20" alloy, heat-treated steel and overlap 4". They are mounted to pan-type blade carriers. The mower deck is constructed of heavy 10-gauge steel with 1/4" x 9" high side skirts. DRIVELINE:
Both the A 96B Lift- and Pull-Type mowers have a Cat 4 driveline with slip clutch and safety shields. SKID SHOES:
The mowing units are equipped with two replaceable skid shoes. CUTTING HEIGHT:
The cutting height may be adjusted from 1" to 12". TAILWHEELS:
On the Lift-Type unit, dual 4" x 8" laminated tailwheels are standard. On the Pull-Type unit options include: Laminated Tires and Wheels; Used Airplane Tires and Wheels; 15" Wheels (Wheels Only); or Implement Tires and Wheels.
deflectors: A front deflector and a solid skirt on the rear. WEIGHT:
The approximate weight of these units with standard deflectors are: A 96B Lift-Type - 1490 pounds; A 96B Pull-Type - 1630 pounds. OFFSET ADAPTER:
The Lift-Type model may be purchased with an offset hitch that will allow the operator to cut outside the right or left tractor tire. OTHER OPTIONAL EQUIPMENT:
Front and Rear Chain Guards (Both Models); Check Chains (Lift-Type); Spring Shock Absorber and Stroke Control (Pull-Type).
ADDITIONAL SPECIFICATIONS:
 |
Cutting Widths:
62” and 74”
Cutting Height:
Fully adjustable from 1/2” to 6” in 1/2” increments
Cutting Housing:
10-Gauge Top and 5-16” End-Plates with Bearing Guards
Skid Shoes:
Full length, Replaceable
Cutter Shaft:
Dynamically Balanced - 4 1/2” Diameter, 3/8” Wall |
|
Cutter Shaft Bearings:
1 - 15/16” Bore greaseable, sealed, self-aligning
Rear Roller:
6” diameter, 1/4” wall, full-length tube rated at 6,000 lbs.
Approximate Weight:
62” - 1720 lbs., 74” - 1870 lbs.
Knife Pairs
62” - 36 Coarse Cut, 76 Fine Cut
74” - 36 Coarse Cut, 92 Fine Cut
Tractor HP Requirements:
Minimum 50-90 HP | |
| Warranty:
One year limited parts and labor. Non-governmental users are subject to modified policy. Only genuine Alamo Industrial parts should be used for warranty replacement. |
Contact
us with additional questions
*Product weights are approximate.
Final weight will depend on variable options chosen. This information
is intended to be of a general nature only. Specifications are
subject to change without notice as we continue to modify our
products.
© 2003 Alamo Group Inc. Alamo Industrial and Grass King are registered trademarks of Alamo Group Inc.
|
